Our setup for biking a toddler to preschool

From preschooler parents in the Berkeley Hills

Mac Ride child bike seat mounted at the front of a mountain bike, a toddler seated ahead of a parent in a park.

We only recommend things we use or have researched closely. Some links on this page are affiliate links, and buying through them costs you nothing extra. As an Amazon Associate I earn from qualifying purchases. How we make money

What do you need to bike a toddler to preschool?

A child seat that fits your bike, helmets, lights and sounds so other road users notice you, and ideally a bike radar to know what's coming up behind you. On my older "analog" (non e-bike) mountain bike, we use a Mac Ride seat with a dropper post, plus a Garmin radar and hybrid pedals that have great traction against my Vans. If your bike has a carbon frame, an unusual dropper, or no exposed steerer, check seat compatibility before anything else.

What we use

Mac Ride child bike seat in black, shown on its own against a white background, with a padded seat and two clamp loops.

Front-mounted child bike seat

Mac Ride child bike seat

Owned and used by us

Love that it is very quick to mount and unmount if I'm going on a ride by myself.

PNW Components Cascade 150 mm dropper seatpost standing upright against a white background, black with a lever collar.

Dropper seatpost

PNW Components Cascade dropper post, 150 mm

Owned and used by us

Helps a ton getting the child on and off the bike with your feet planted flat.

Garmin Varia RearVue 820 bike radar taillight shown upright against a plain white background, red light glowing.

Rear bike radar

Garmin Varia RearVue 820

Owned and used by us

My favorite discovery after a decade-long break from biking. I consider it essential safety equipment.

TUSITA seat rail mount kit clamped under a bike saddle, holding a black radar tail light with its red light glowing.

Radar mount

TUSITA seat rail mount kit

Owned and used by us

Puts the radar up higher. On a dropper post it would sit quite low, and the child seat leaves no room anyway.

Hammerhead Karoo bike computer angled to show its touchscreen with a route map, ride stats and a turn arrow.

Bike computer

Hammerhead Karoo bike computer

Owned and used by us

A phone mount can damage a phone camera's image stabilization, so the radar alerts go to this instead.

Shimano PD-EH510 hybrid pedal seen from above, black flat platform with a silver SPD clip mechanism in the center.

Hybrid pedals (flat and SPD)

Shimano PD-EH510 pedals

Owned and used by us

Grippy pins on one side for casual shoes, clip in on the other for solo rides.

Vans Atwood black canvas sneaker with black laces and a white rubber sole, shown at an angle on a white background.

Shoes for flat pedals

Vans Atwood

Owned and used by us

Flat casual shoes for pedals with pins.

Knockaround Premiums Polarized kids sunglasses with a black frame and green mirrored lenses, shown at an angle on white.

Kids sunglasses

Knockaround Premiums Polarized sunglasses (kids)

Owned and used by us

The pair that stays on better.

Sunski Mini Madrona Polarized kids sunglasses with tortoiseshell frames and brown lenses, shown folded flat on white.

Kids sunglasses

Sunski Mini Madrona Polarized sunglasses (kids)

Owned and used by us

She prefers them because they are like mama's.

Lazer Nutz KinetiCore kids bike helmet in glossy pink with red hearts, black vents, and black chin straps with buckle.

Kids bike helmet

Lazer Nutz KinetiCore

Owned and used by us

The one we started with, and it seems fine.

BLITZU USB rechargeable tail light mounted on a white bike helmet, its red lens and green LED strip lit up.

Helmet rear light

BLITZU USB rechargeable tail light

Owned and used by us

The old one I happened to have. Drivers see both the radar's light on the seat and this one up higher on my helmet.

Timber Mountain Bike Bell (Yew! bolt-on) in black with its handlebar clamp open, beside two split black spacer rings.

Bike bell

Timber Mountain Bike Bell (Yew! bolt-on)

Owned and used by us

It's our daughter's job to turn it on, and then it rings constantly as we ride.

The bike is an older mountain bike, and almost everything on it got chosen because of that. It has an externally routed dropper post, flat-ish pedals, and a seat that clamps to the headset and the seatpost. Here’s each piece and why it’s there. Each one links to a longer write-up.

The seat: Mac Ride

The Mac Ride sits between the adult’s arms, in front of the saddle. It clamps to a headset spacer at the front and to the seatpost at the back. It’s rated for kids roughly 2 to 5 and up to 60 lb.

On our bike, the seatpost clamp just barely fits around the externally routed dropper post. The rear clamp goes on the static part of the post and needs 20 mm of it. If your dropper’s cable or mechanism takes up that space, check before you order.

The part we’d miss most if we switched: it comes off fast. When one of us rides alone, the seat comes off in a minute and the bike is a normal mountain bike again.

We compared it with the Kids Ride Shotgun seat, which we haven’t used. See Mac Ride vs. Kids Ride Shotgun.

The dropper post: PNW Cascade 150 mm

A dropper wasn’t on our list until we started carrying a kid. With the saddle dropped, you can stand with both feet flat while lifting her on and off, which is when the bike feels least stable. It also lets you ride with a slightly wider, knees-out stance, because there’s a small person between your legs.

More in the dropper post write-up.

Radar: Garmin Varia RearVue 820

The radar sits on the saddle rails with a TUSITA mount and shows approaching cars on a Hammerhead Karoo. It’s the piece we tell friends about first: on the ride to school we know when a car is coming up behind us, and when nothing is, we’re more confident taking the lane.

More in bike radar with a kid.

Pedals and shoes: Shimano PD-EH510 and Vans

These pedals have an SPD clip-in on one side and a flat platform with pins on the other. With the kid on board we ride the flat side in Vans, so a foot can come down instantly. See hybrid pedals and Vans.

Sunglasses

She has two pairs. The Knockaround Premiums stay on better. The Sunski Mini Madronas are the ones she prefers, because they look like her mom’s, but they need a prominent nose bridge to sit right. More in the sunglasses we use.

Helmets, a light and a bell

Her helmet is a Lazer Nutz KinetiCore. It’s the one we started with, and it seems fine; we haven’t had a reason to change it. My helmet has a BLITZU USB rechargeable tail light, an older one I already had. We want to be as visible as possible, so drivers see both the radar’s light on the seat and a second one up higher on my helmet.

The bell is a Timber Yew bolt-on. It rings by itself as the bike moves over bumps, and a lever switches it on or off. It’s our daughter’s job to turn it on as soon as she gets on the bike. The bell constantly rings, so you don’t have to see a person and ring it for them to know you’re coming.

What changes on a different bike

The Mac Ride also fits commuter and road bikes, though drop bars leave less room. If your bike has a non-standard steerer, cables running out the top of the headset, a double-crown fork, or folds, check Mac Ride’s compatibility page first. The Kids Ride Shotgun 2.0 needs front suspension and doesn’t fit e-bikes. Both seats are rated carbon safe. If your saddle can’t drop, practice getting on and off at a curb before the first school run.

Sources

  1. Mac Ride child bike seat (product page) (checked October 20, 2026)
  2. Mac Ride Child Bike Seat review, Australian Mountain Bike (checked October 20, 2026)
  3. Mac Ride bike compatibility (checked October 20, 2026)
  4. Mac Ride unique situations (bike types) (checked October 20, 2026)
  5. Shotgun 2.0 child bike seat, Kids Ride Shotgun (checked October 20, 2026)
  6. Timber Model Yew bolt-on bell, Bike24 listing (checked October 20, 2026)
  7. Lazer Nutz KinetiCore kids helmet (checked October 20, 2026)

Keep reading

More gear

All gear