The car seat we chose for extended rear-facing

From preschooler parents in the Berkeley Hills

We only recommend things we use or have researched closely. Some links on this page are affiliate links, and buying through them costs you nothing extra. As an Amazon Associate I earn from qualifying purchases. How we make money

Which car seat lets a toddler stay rear-facing longer?

Any seat with a high rear-facing limit, and the room for your kid's legs to use it. We chose the Graco Extend2Fit, which Graco rates to 50 lb rear-facing and which has an extension panel for extra legroom. The legroom doesn't raise the seat's limits; it makes the time up to those limits more comfortable. The trade-off is a fussier seat-belt installation than seats with a built-in belt lock-off. If you install with LATCH or rarely move the seat, that's less of a problem.

What we use

Graco Extend2Fit convertible car seat in Redmond fabric, shown angled from the front with cup holders and harness buckled.

Convertible car seat

Graco Extend2Fit convertible car seat (Redmond)

Owned and used by us

The extension on this one gives her more legroom.

DARVIQS baby car seat mirror with a black frame, reflecting a smiling toddler buckled into a red and black car seat.

Car seat mirror

DARVIQS baby car seat mirror

Owned and used by us

So we can see her, she can see out a bit, and little kids love looking at themselves in the mirror.

It’s safer for kids to stay rear-facing as long as possible. The American Academy of Pediatrics recommends keeping a child rear-facing until they reach the highest rear-facing weight or height their seat allows. The problem with following that is legs: a tall toddler runs out of room against the vehicle seat long before the car seat’s limits.

Why the Extend2Fit

The Graco Extend2Fit has an extension panel that slides out from the front of the seat. The panel has four positions and adds up to 5 inches of legroom when rear-facing. On ours, it gives her more legroom, which makes staying rear-facing a lot more comfortable. Graco rates the seat rear-facing from 4 to 50 lb.

The extension doesn’t change the seat’s limits. It only changes how comfortable those limits are to reach. Check the label on your seat for its numbers.

Installing it tight with a seat belt

This seat is not as nice to install as the ones with a hatch for the seat belt, where you press the hatch down to lock the belt in. Getting it tight takes some work. Here’s what we do: when installing the car seat, take off the cover and pull the seat belt through. Then really yank up on the belt while moving the seat side to side. The Car Seat Lady’s video Install a car seat like a pro: Inside / Outside Trick shows the technique well.

Add a mirror

Get a mirror for the back seat, like the DARVIQS one we use. With a rear-facing seat, it’s how the driver sees the kid at a red light without turning around.

If you move the seat between cars often, look at a seat with a seat-belt lock-off, or install with LATCH where your car and kid’s weight allow it. For short trips in other people’s cars, see the RideSafer vest.

Sources

  1. Extend2Fit convertible car seat, Graco (checked October 20, 2026)
  2. Car seats: information for families, HealthyChildren.org (AAP) (checked October 20, 2026)
  3. Install a car seat like a pro: Inside / Outside Trick, The Car Seat Lady (YouTube) (checked October 20, 2026)
  4. DARVIQS baby car seat mirror (Amazon) (checked October 20, 2026)

Keep reading

More gear

All gear